Ultrawing Chisel Plow Sweeps

43° Ultrawing Chisel Plow Sweeps – 2-1/4″ Hole Spacing43° Stem Angle, 2″ wide shank, 2-1/4″ hole spacing for 1/2″ plow bolts

1/4″ Material

Size	Crown	Part Number	Weight (lbs)
10″	Flat	AA4310-2	4.25
10″	High	B4310-2	4.25
12″	Flat	AA4312-2	4.8
12″	High	B4312-2	4.8
14″	Flat	AA4314-2	5.3
14″	High	B4314-2	5.3
16″	Flat	AA4316-2	6.0
16″	High	B4316-2	6.0
18″	Flat	AA4318-2	7.0
18″	High	B4318-2	7.0

 

5/16″ Material

Size	Crown	Part Number	Weight (lbs)
10″	High	B4310F-2	5.0
12″	High	B4312F-2	6.0
14″	High	B4314F-2	6.6
16″	High	B4316F-2	7.0
18″	High	B4318F-2	8.25

Will fit these machines: Ingham, some MF, Massey-Harris, Mel-Cam Cultiweeder, Minn-Toba 3-point hitch, Morris 220, ’82 Magnum, Oliver 500, 3500, Wilrich (earlier models)

43° Ultrawing Chisel Plow Sweeps – 2-1/2″ Hole Spacing43° Stem Angle, 2″ wide shank, 2-1/2″ hole spacing for 1/2″ plow bolts

1/4″ Material

Size	Crown	Part Number	Weight (lbs)
12″	High	B4312H-2	4.8
14″	High	B4314H-2	5.3
16″	High	B4316H-2	6.0
18″	High	B4318H-2	7.0

 

5/16″ Material

Size	Crown	Part Number	Weight (lbs)
12″	High	B4312FH-2	6.0
14″	High	B4314FH-2	6.6
16″	High	B4316FH-2	7.5
18″	High	B4318FH-2	8.25

Will fit these machines: CCIL, CO-OP, IH, IH Case

47° Ultrawing Chisel Plow Sweeps47° Stem Angle, 2″ wide shank, 2-1/4″ hole spacing for 1/2″ plow bolts

1/4″ Material

Size	Crown	Part Number	Weight (lbs)
10″	High	B4710-2	4.25
12″	Flat	AA4712-2	4.8
12″	High	B4712-2	4.8
14″	Flat	AA4714-2	5.3
14″	High	B4714-2	5.3
16″	Flat	AA4716-2	6.0
16″	High	B4716-2	6.0
18″	Flat	AA4718-2	7.0
18″	High	B4718-2	7.0

 

5/16″ Material

Size	Crown	Part Number	Weight (lbs)
10″	High	B4710F-2	5.0
12″	Flat	AA4712F-2	6.0
12″	High	B4712F-2	6.0
14″	Flat	AA4714F-2	6.6
14″	High	B4714F-2	6.6
16″	Flat	AA4716F-2	7.5
16″	High	B4716F-2	7.5
18″	Flat	AA4718F-2	8.25
18″	High	B4718F-2	8.25

Will fit these machines: Glencoe, Krause (early low-clearance), Melroe-Clark

50° Ultrawing Chisel Plow Sweeps50° Stem Angle, 2″ wide shank, 2-1/4″ hole spacing for 1/2″ plow bolts

1/4″ Material

Size	Crown	Part Number	Weight (lbs)
10″	Flat	AA5010-2	4.25
12″	Flat	AA5012-2	4.8
12″	High	B5012-2	4.8
14″	Flat	AA5014-2	5.3
14″	High	B5014-2	5.3
16″	Flat	AA5016-2	6.0
16″	High	B5016-2	6.0
18″	Flat	AA5018-2	7.0
18″	High	B5018-2	7.0

 

1/4″ Material – Large Pattern

Size	Crown	Part Number	Weight (lbs)
20″	High	B5020-2	7.7
22″	High	B5022-2	8.4
24″	High	B5024-2	9.0

 

5/16″ Material

Size	Crown	Part Number	Weight (lbs)
8″	High	B5008F-2	5.2
12″	Flat	AA5012F-2	6.0
12″	High	B5012F-2	6.0
14″	Flat	AA5014F-2	6.6
14″	High	B5014F-2	6.6
16″	Flat	AA5016F-2	7.5
16″	High	B5016F-2	7.5
18″	High	B5018F-2	8.25

 

5/16″ Material – Large Pattern

Size	Crown	Part Number	Weight (lbs)
26″	High	B5026F-2	15.5

Will fit these machines: Bourgault (deep tillage), Case (later), Deere, Degelman, Fallow King, Fallow-Master, Flexi-Coil, Friggstad, Kewanee, Krause (low-clearance), Landol, Lely, Mel-Cam, MF 128, Minn-Toba 120, 176, Morris Magnum, Noble XR20, Oliver 247, 248, 347, Renn, Robin Nodwell, Roll-O-Flex, Sunflower, Versatile, Victory, White